二维超声速空气引射器启动特性试验研究

超声速引射器是高空模拟试车台的重要组件,在发动机启动前利用引射器对试验舱预抽真空,可避免发动机启动初始时刻燃气漏入试验舱造成燃气在发动机中分离,对获取发动机在高空环境下的完整推力特性具有重要意义。而该工况下超声速引射器的启动过程是引射器工作过程中最为恶劣的工况,设计不合理的引射器会导致启动压力过高甚至不能实现启动。建立了缩比超声速空气引射器试验台对超声速引射器的启动特性进行研究,采用压力测量方法结合纹影技术对超声速引射器处于极限启动压比时的流场进行了描述,研究结果表明混合室收缩比越小,引射器极限启动压比越低。同时给出了定位超声速引射器不启动原因的判据:当引射器不启动是由引射总压不足引起时,盲腔压力在引射总压提高时降低,并在临界启动状态下达到最小值;而由混合室收缩比过小导致的引射器不启动在引射总压提高时盲腔压力单调上升。     

Determination of burn‐in parameters and residual life for highly reliable products

Today, many products are designed and manufactured to function for a long period of time before they fail. Determining product reliability is a great challenge to manufacturers of highly reliable products with only a relatively short period of time available for internal life testing. In particular, it may be difficult to determine optimal burn‐in parameters and characterize the residual life distribution. A promising alternative is to use data on a quality characteristic (QC) whose degradation over time can be related to product failure. Typically, product failure corresponds to the first passage time of the degradation path beyond a critical value. If degradation paths can be modeled properly, one can predict failure time and determine the life distribution without actually observing failures. In this paper, we first use a Wiener process to describe the continuous degradation path of the quality characteristic of the product. A Wiener process allows nonconstant variance and nonzero correlation among data collected at different time points. We propose a decision rule for classifying a unit as normal or weak, and give an economic model for determining the optimal termination time and other parameters of a burn‐in test. Next, we propose a method for assessing the product's lifetime distribution of the passed units. The proposed methodologies are all based only on the product's initial observed degradation data. Finally, an example of an electronic product, namely contact image scanner (CIS), is used to illustrate the proposed procedure. © 2002 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

伟大的旗帜深刻的意蕴

党的十七大鲜明确立了中国特色社会主义旗帜的指导地位。中国特色社会主义旗帜,是马克思主义真理观和价值观相统一的旗帜;其精神实质,是坚持科学社会主义基本原则与根据我国实际和时代特征赋予其鲜明中国特色的有机统一;其实践形态,是中国特色社会主义道路;其理论形态,是中国特色社会主义理论体系。高举中国特色社会主义伟大旗帜,就需要倍加珍惜、长期坚持和不断发展这条道路和理论体系。     

A general model of heterogeneous system lifetimes and conditions for system burn‐in

Burn‐in is a technique to enhance reliability by eliminating weak items from a population of items having heterogeneous lifetimes. System burn‐in can improve system reliability, but the conditions for system burn‐in to be performed after component burn‐in remain a little understood mathematical challenge. To derive such conditions, we first introduce a general model of heterogeneous system lifetimes, in which the component burn‐in information and assembly problems are related to the prediction of system burn‐in. Many existing system burn‐in models become special cases and two important results are identified. First, heterogeneous system lifetimes can be understood naturally as a consequence of heterogeneous component lifetimes and heterogeneous assembly quality. Second, system burn‐in is effective if assembly quality variation in the components and connections which are arranged in series is greater than a threshold, where the threshold depends on the system structure and component failure rates. © 2003 Wiley Periodicals, Inc. Naval Research Logistics 50: 364–380, 2003.     

风场的科学计算可视化在导弹射击中的应用

在导弹射击时,消除风会对导弹飞行造成不利的影响,因此基于可视化分析的研究模型、流程等,利用科学计算方法直观分析优点对风的大小和方向进行分析,并采用开放图形接口对实验风场数据进行了三维图形绘制以提高导弹打击目标的精度,对实际中导弹的风场阻力研究有一定的指导意义.     

高功率微波对YBCO超导材料的改性

用固相反应法制备了123相YBCO超导块材。利用超导电性（Tc）测量、扫描电镜（SEM）等方法研究了高功率微波加载及退火处理对YBCO样品的影响。电阻－温度关系曲线表明,处理后的样品在超导起始转变温度Tco≈90K处由半导体型向超导转变,超导转变宽度△T增大。SEM结果显示,晶粒大大细化。作者认为,由于高功率微波对样品的瞬时高压作用,在样品中引入了阻碍磁通蠕动的钉扎中心,同时,退火处理改善了晶粒之间的弱连接,为提高临界电流密度Jc创造了条件。     

武警学院创新教育的探索与实践

高等院校作为知识创新的基地和人才培养的摇篮,必须将创新意识和实践能力的培养融入到教育的全过程。武警学院作为一所公安现役高等院校,通过加快课程体系建设和教学内容、教学方法改革,加大实践教学比重,改革考试方法、完善教学评价体系等措施,初步构建起了具有自身特色的创新教育人才培养模式。     

高隔离度干涉截止滤光片的设计与制备

根据光通讯无源器件和激光探测仪器对光学薄膜的特殊需求,采用解析法和自动优化法综合设计了高隔离度的干涉截止滤光片,分析了膜厚改变2%对设计膜系的透过率曲线的影响,通过莱宝APS1104镀膜机对所设计的膜系进行了实际镀制,获得了性能优良的高隔离度截止滤光片.     

聚二甲基硅烷高压合成聚碳硅烷的组成与结构分析

以聚二甲基硅烷(PDMS)为原料,在高压釜内450℃下反应6h,制备了聚碳硅烷(PCS)先驱体。对其组成及结构进行了表征,推测了PCS的大致结构模型。研究表明,PCS分子包含Si CH3、Si CH2 Si、Si H组成的SiC4、SiC3H等结构单元,实验式为SiC1.87H7.13O0.03。与常压高温裂解制备的软化点相近的PCS相比,二者的元素组成基本一致,高压合成的PCS具有较高的分子量和硅氢含量,但支化度略高。     

履带车辆转向过程仿真与试验研究

分析了简化条件下和考虑滑转滑移条件下履带车辆在坚实地面上的转向过程,对比计算了2种条件下转向时的牵引力、制动力、转向阻力矩和转向半径,并通过实车试验进行检验.结果表明,滑动模型揭示了履带车辆转向机理,与试验结果较为吻合.